BIOGAS TECHNOLOGY: A TRAINING MANUAL FOR EXTENSION
source: http://www.fao.org/docrep/008/ae897e/ae897e00.htm
TABLE OF TABLES
TABLE OF FIGURES
TABLE OF CHARTS
TABLE OF ANNEXES
ACRONYMS AND ABBREVIATIONS
RELEVANT UNITS AND CONVERSION FACTORS
INTRODUCTION TO MANUAL
SESSION ONE : SYSTEM APPROACH TO BIOGAS TECHNOLOGY
1.1 Introduction
1.2 Components of a Biogas System
1.4 Session Plan
1.5 Review Questions
1.6 References
1.7 Further Reading Materials
SESSION TWO : RELEVANCE OF BIOGAS TECHNOLOGY TO NEPAL
2.1 Introduction
2.2 Energy Situation in Nepal
2.4 Biogas Potential in Nepal
2.5 Uses of Biogas
2.7 Biogas and Forests
2.8 Biogas and Women
2.9 Health and Sanitation
2.10 Municipal Waste
2.11 Economy and the Employment
2.12 Session Plan
2.13 Review Questions
2.14 References
2.15 Further Reading Materials
SESSION THREE : BIOGAS PROGRAMMES
3.1 Introduction
3.2 Biogas Programmes in China
3.4 Biogas in Nepal
3.6 Review Questions
3.7 References
3.8 Further Reading Materials
SESSION FOUR : UTILIZATION OF SLURRY AS FEED AND FERTILIZER
4.1 Introduction
4.2 Inter-Relationship of Biogas Technology and Agriculture
4.3 Limitations of Chemical Fertilizer Use
4.4 Organic Fertilizer
4.5 Importance of Slurry for Crop Production
4.6 Characteristics of Digested Slurry
4.7 Utilization of Digested Slurry...
4.9 Quality Assessment of Compost and Digested Slurry
4.10 Influence of Slurry on the Yield of Crops and Vegetables
4.11 Field Experiment
4.12 Effluent as a Supplement in Ration of Animal and Fish
4.14 Session Plan
4.15 Review Questions
4.16 References
4.17 Other Reading Materials
SESSION FIVE : INSTALLATION COST AND FINANCIAL VIABILITY
5.1 Introduction
5.2 Financial Analysis
5.4 Financial Viability Assessment as Practiced by ADB/N
5.5 Indicators of Financial Viability of Biogas Plants
5.6 Economic Analysis
5.8 Review Questions
5.9 References
SESSION SIX : SUBSIDY AND INSTITUTIONAL FINANCING
6.1 Introduction
6.2 Definition of Subsidy
6.3 Rationale of Subsidy for Biogas Plant Installation
6.4 Subsidy and External Financing
6.5 Review of Subsidy on Biogas Programmes in Nepal
6.6 Institutional Financing
6.7 Flow of Funds
6.8 Procedure for Obtaining Loan and Subsidy with Technical Assistance
6.9 Session Plan
6.10 Review Questions
6.11 Reference
SESSION SEVEN : FIELD VISIT PROGRAMME
7.1 Introduction
7.2 Methodology
7.3 Themes for Observation
7.4 Information on Plants Visited in each of the Five Training
7.5 General Opinions and Impression about Field Visits
7.6 Review Questions
SESSION EIGHT : EXTENSION SUPPORT SERVICES FOR BIOGAS
8.1 Introduction
8.2 From a Single Plant to National Objectives and Strategy
8.6 Extension Methods
8.8 Relevant Questions
8.9 References
SESSION NINE : QUALITY STANDARDS
9.1 Introduction
9.2 The Need for Quality Control
9.3 Development of a System for Quality Control
9.6 Commissioning
9.7 After-Sale-Services
9.8 Mobile Team for Supervision, Follow up and Monitoring
9.9 Common Problems in Plant Operation
9.10 Session Plan
9.11 Review Questions
9.12 References
9.13 Further Reading Materials
SESSION TEN : MONITORING AND EVALUATION
10.1 Introduction
10.2 Definitions
10.3 Indicators and Data Base
10.4 M&E as Integral Part of Programme Implementation Process
10.5 M&E At Different Levels
10.7 Session Plan
10.8 Review Questions
10.9 References
APPENDICES
source: http://www.fao.org/docrep/008/ae897e/ae897e00.htm
TABLE OF CONTENTS
PREFACE TABLE OF TABLES
TABLE OF FIGURES
TABLE OF CHARTS
TABLE OF ANNEXES
ACRONYMS AND ABBREVIATIONS
RELEVANT UNITS AND CONVERSION FACTORS
INTRODUCTION TO MANUAL
SESSION ONE : SYSTEM APPROACH TO BIOGAS TECHNOLOGY
1.1 Introduction
1.2 Components of a Biogas System
1.2.1 Biogas1.3 Implications of Biogas System
1 2.2 Methanogenic Bacteria or methanogens
1.2.3 Biodigester
1.2.4. Inputs and their Characteristics
1.2.5 Digestion
1.2.6 Slurry
1.2.7 Use of Biogas
1.4 Session Plan
1.5 Review Questions
1.6 References
1.7 Further Reading Materials
SESSION TWO : RELEVANCE OF BIOGAS TECHNOLOGY TO NEPAL
2.1 Introduction
2.2 Energy Situation in Nepal
2.2.1 Tradition Sources of Energy2.3 Biogas in Other Countries
2.2.2 Commercial Sources of Energy
2.2.3 Sources of Alternative Energy
2.4 Biogas Potential in Nepal
2.5 Uses of Biogas
2.5.1 Cooking2.6 Biogas and Agriculture
2.5.2 Lighting
2.5.3 Refrigeration
2.5.4 Biogas-fueled Engines
2.5.5 Electricity Generation
2.7 Biogas and Forests
2.8 Biogas and Women
2.9 Health and Sanitation
2.10 Municipal Waste
2.11 Economy and the Employment
2.12 Session Plan
2.13 Review Questions
2.14 References
2.15 Further Reading Materials
SESSION THREE : BIOGAS PROGRAMMES
3.1 Introduction
3.2 Biogas Programmes in China
3.2.1 Use of Gas and Slurry3.3 Biogas programme in India
3.2.2 Training
3.2.3 Organization
3.4 Biogas in Nepal
3.4.1 Brief History of Biogas Development in Nepal3.5 Session Plan
3.4.2 Programmes of GGC and its Linkage
3.4.3 Support for the Development of a National Biogas Programme (FAO/TCP/NEP/4451-T)
3.4.4 Biogas Support Programme
3.4.5 Basic Features of BSP Third Phase
3.4.6 Biogas Companies
3.4.7 Need for Research and Development
3.6 Review Questions
3.7 References
3.8 Further Reading Materials
SESSION FOUR : UTILIZATION OF SLURRY AS FEED AND FERTILIZER
4.1 Introduction
4.2 Inter-Relationship of Biogas Technology and Agriculture
4.3 Limitations of Chemical Fertilizer Use
4.4 Organic Fertilizer
4.5 Importance of Slurry for Crop Production
4.6 Characteristics of Digested Slurry
4.7 Utilization of Digested Slurry...
4.7.1 Application of Slurry in Liquid Form4.8 Size of Compost Pit
4.7.2 Application of Slurry in Dried Form
4.7.3 Utilization of Slurry for Compost Making
4.9 Quality Assessment of Compost and Digested Slurry
4.10 Influence of Slurry on the Yield of Crops and Vegetables
4.11 Field Experiment
4.12 Effluent as a Supplement in Ration of Animal and Fish
4.12.1 Digested Slurry as a Feed to Animal4.13 Other Uses
4.12.2 Digested Slurry as a Feed to Fish
4.12.3 Improving the Quality of Feed
4.14 Session Plan
4.15 Review Questions
4.16 References
4.17 Other Reading Materials
SESSION FIVE : INSTALLATION COST AND FINANCIAL VIABILITY
5.1 Introduction
5.2 Financial Analysis
5.2.1 Project Life5.3 Discussion on Result of Financial Analysis
5.2.2 Benefits and Costs
5.2.3 Cash Flow Analysis
5.2.4 Time Value of Money and Discount Rate (Factor)
5.2.5 Net Present Value
5.2.6 Internal Rate of Return (IRR)
5.2.7 Benefit Cost Ratio
5.4 Financial Viability Assessment as Practiced by ADB/N
5.5 Indicators of Financial Viability of Biogas Plants
5.6 Economic Analysis
5.6.1 Economic Valuation of Firewood5.7 Session Plan
5.6.2 Economic Valuation of Kerocene
5.6.3 Economic Valuation of Labour
5.6.4 Value of Slurry
5.6.5 Investment Cost
5.8 Review Questions
5.9 References
SESSION SIX : SUBSIDY AND INSTITUTIONAL FINANCING
6.1 Introduction
6.2 Definition of Subsidy
6.3 Rationale of Subsidy for Biogas Plant Installation
6.4 Subsidy and External Financing
6.5 Review of Subsidy on Biogas Programmes in Nepal
6.6 Institutional Financing
6.7 Flow of Funds
6.8 Procedure for Obtaining Loan and Subsidy with Technical Assistance
6.9 Session Plan
6.10 Review Questions
6.11 Reference
SESSION SEVEN : FIELD VISIT PROGRAMME
7.1 Introduction
7.2 Methodology
7.3 Themes for Observation
7.4 Information on Plants Visited in each of the Five Training
7.5 General Opinions and Impression about Field Visits
7.6 Review Questions
SESSION EIGHT : EXTENSION SUPPORT SERVICES FOR BIOGAS
8.1 Introduction
8.2 From a Single Plant to National Objectives and Strategy
8.2.1 Building Government Commitment8.3 Institutions for Extension of Biogas Technology
8.2.2 Energy Related Objective of Eighth Five Year Plan
8.2.3 Objectives and Strategies of Perspective Energy Plan
8.3.1 Establishment of Biogas Companies and Biogas Related NGOs8.4 Factors Affecting Biogas Extension
8.3.2 Formation of Biogas Steering Committee
8.3.3 Proposed Alternate Energy Promotion Centre
8.4.1 Government Commitment8.5 Extension Approaches
8.4.2 Subsidy
8.4.3 Institutional Arrangements
8.4.4 Energy Pricing
8.4.5 Education and Access to Technology
8.4.6 Performance of Existing Plants
8.6 Extension Methods
8.6.1 Door-to-door Visits8.7 Session Plan
8.6.2 Use of Local Leaders
8.6.3 Exhibitions and Demonstration
8.6.4 Use of Mass Media
8.6.5 Occasional Publications
8.6.6 Audio-Visuals
8.6.7 Seminars and Workshops
8.6.8 Training
8.8 Relevant Questions
8.9 References
SESSION NINE : QUALITY STANDARDS
9.1 Introduction
9.2 The Need for Quality Control
9.3 Development of a System for Quality Control
9.3.1 Enforcement of Quality Control Measures9.4 Important Parameters for Quality Control
9.4.1 Design9.5 Appliances and Accessories
9.4.2 Deciding on the Size or Capacity of a Plant
9.4.3 Site Selection
9.4.4 Construction Materials and Trained Mason
9.4.5 Critical Stage of Construction
9.6 Commissioning
9.7 After-Sale-Services
9.8 Mobile Team for Supervision, Follow up and Monitoring
9.9 Common Problems in Plant Operation
9.10 Session Plan
9.11 Review Questions
9.12 References
9.13 Further Reading Materials
SESSION TEN : MONITORING AND EVALUATION
10.1 Introduction
10.2 Definitions
10.3 Indicators and Data Base
10.4 M&E as Integral Part of Programme Implementation Process
10.5 M&E At Different Levels
10.5.1 User Level10.6 The Logical Framework
10.5.2 Biogas Company Level
10.5.3 Programme Level
10.5.4 National Level
10.7 Session Plan
10.8 Review Questions
10.9 References
APPENDICES
Appendix - 1 Registration Form
Appendix - 2 Training Schedule (including field visit)
Appendix - 3 Evaluation Form (to be filled in by the participants)
Appendix - 4 Model of Certificate
0 comments:
Post a Comment